Standard receiver
with left and right rods
High profile compatible
with Comfort Plus Series
Our swing away receiver supports lateral facial pads and switches for access to external assistive technology devices, or even a chin joystick.
High profile compatible
with Comfort Plus Series
Low profile compatible
with AP, CB, Ultra and i2i
Multiple point receiver
compatible with all pads
Imperial 1in/17mm ball
swing away system
2 point standard high profile (SAR2A) Swing Away is compatible with the Comfort Plus (CP) head support, the Standard flat profile (SAR2C), Tri-Comfort Plus (TCP) and Adjustable Comfort Plus (ACP) head support.
The high profile allows you to position the rods a little higher from the center of the head pad, which is ideal for pads with a higher profile, such as the Comfort Plus Series.
If the configuration requires you to have the rods over or below the head pad, the 4-point profile is a better choice.
Standard receiver
with left and right rods
Standard receiver with
left side rod only
Standard receiver with
right side rod only
Standard flat receiver
with left and right rods
Standard flat receiver with
left side rod only
Standard flat receiver with
right side rod only
2 points low profile Swing Away is compatible with the All Positioning (AP), Combo (CB), i2i, and UniLink Ultra head support.
The low profile positions the rods at the center of the head pad, which is ideal for pads with lower profile such as the Ultra occipital pads, the i2i low profile and the Combo head support.
If the configuration requires to have the rods over or below the head pad you can choose the Figure 8. A 4-point might produce too much offset, but is still a vaible options if your configuration might benefit of that much offset.
Low Profile receiver
with left and right rods
Low Profile receiver
with left side rod only
Low Profile receiver
with right side rod only
4 points high profile Swing Away is compatible with the Comfort Plus Contour (CP) head support.
This profile is ideal when you need the rods to offset from the top or bottom of your pad.
4 Points Profile
with rods in each point
4 Points Profile
with arms only
4 Points Profile
with both lower points
4 Points Profile
with both upper rods
Left Side 4 Points Profile
Left Side 4 Points Profile
with upper right rod
Right Side 4 Points Profile
Right Side 4 Points Profile
with upper left rod
Get it out of the way
without losing any set up
The second generation design
brings arm's height adjustment
The swing away system
can be adjusted on-demand
Lots of accessories, mountings
and adapters to choose from
Swing Away keeps the set up even when swung out of the way with a 92° easy to use companion assist release mechanism. Rods swing back into place without losing their position and each elements attach to them as well.
Swing Away second generation introduces arms height adjustment. Each arm can be independently adjusted in three steps 30° increments
The swing away high adjustability includes adjustment to:
Ergonomic design
for a natural touch
Low force touch
with clear feedback
Small footprint
with audible feedback
Beyond enjoying
your favorite drink
Proximity sensor switch
with laser technology
Comfort and support
where is needed most
Different sizes
for multiple purposes
Additinal rod
when it is needed
Power router system
for sensor switches
All switches can function as access switch for mode or selection use on a drive control, emulating alternative mouse buttons, for augmentative communication devices, for accessing environmental control systems, interacting with simple toys, or controlling any other device that can be navigated with one or more switches.
The Egg Switch is bright and colorful with a playful shape making it great for attracting and keeping the attention of children.
The egg mechanical switch main features are:
Egg switch
with black cover
Egg switch
with blue cover
Egg switch
with green cover
Egg switch
with red cover
Egg switch
with yellow cover
Egg switch 17mm ball configuration mount
Figure 8 adapter
with ESM
The Micro Light mechanical switch main features are:
Micro Light mechanical switch
Micro Light switch mount
The Mini-Cup mechanical switch main features are:
Mini-Cup mechanical switch
with color options
Embedded Mini-Cup switch
modification to any pad
Sip & Puff switches are designed for users with limited or no motor control. Used for wheelchair navigation, augmentative communication, computers, or any device that will function with this type of switch input.
Manipulating a standard switch for people with motor disabilities can be difficult, tiring, or impossible.
A correctly set up pneumatic switch can activate and control devices through a simple inhale and/or exhale into a mouth tube connected to the i‑Connect™ pneumatic switch interface to turn sips and puffs into electrical signals.
Swing Away flex-tube mount
for Sip & Puff switch
i‑Connect pneumatic
switch interface
The Proximity Fiber Optic Sensor is a small sensor that can be located in any confined space or close to each other. Fiber optic sensors are not affected by electromagnetic interference and does not conduct electricity. Powered by the i‑Connect System.
The Fiber Optics sensor switch main features are:
Swing Away mount
with fiber optic sensor switch
Swing Away mount with temporal pad
and fiber optic sensor switch
i‑Connect Fiber Optics Interface
Available on 12 Volt or 24 Volt
3in (7.62cm) x 2in (5.08cm)
facial/temporal pad
4in (10.16cm) x 2in (5.08cm)
facial/temporal pad
6in (15.24cm) x 1 1/2in (3.81cm)
facial/temporal pad (Bendable)
6in (15.24cm) x 2in (5.08cm)
facial/temporal pad (Bendable)
6in (15.24cm) rod
9in (22.86cm) rod
13in (33.02cm) rod
18in (45.72cm) rod
24in (60.96cm) rod
A Figure 8 mount slides into any lateral rod to provide the placement of an additional switch or joystick.
The standard comes ready to receive an Egg Switch since includes an Egg Switch mount (ESM), but other elements are compatible as well.
Includes 9in (22.86cm) rod,
plastic spiral and egg switch mount
Includes 6in (15.24cm) rod,
plastic spiral and egg switch mount
Includes 9in (22.86cm) rod,
plastic spiral and egg switch mount
Includes 13in (33.02cm) rod,
plastic spiral and egg switch mount
Includes 18in (45.72cm) rod,
plastic spiral and egg switch mount
Figure 8 ring to add flex-tube
for additional fiber optics
or sip & puff switches
Compatible with
non metric CP Original
Compatible with
17mm ball non metric
AP, CB, Ultra and i2i
Compatible with non metric
TCP, ACP and Contoured
Based on the CPS9 compatible
with non metric Comfort Plus Series
and Contoured